Honda P-NUT concept

This design is dominated by its mono-space theme that tapers in plan forwards to reflect its arrow-head three seat configuration. Look inside and the rational for the seating layout is the same as the McLaren F1 that pioneered it: to allow seating for more than two in a short length by putting the passengers' legs and feet to the sides of the driver, while the driver's legs and feet sit between the front wheels. But what you also see when you look inside the P-NUT is a very crude model and a design that appears little developed: there was scant detailing and negligible use of color or materials.

The exterior perhaps also suffers from an apparently rushed and/or under-resourced design process, but there is an appealing uniqueness to the concept, some great details and some impressive resolution also.

The front face is perhaps the least comfortable aspect with an overly literal ‘mean face'. This is made of a low set mouth/grille glazing element (that augments forward visibility) connected to the lamps. Just above the DRG is a visually weak point where the tapering A-pillars form two sharp corners with no supporting ‘mass'. But the dramatic tapering A-pillars is unique and also creates a broad front shoulder that tapers rearwards, which lends an appealing robustness to this small car. The shoulder surface is near horizontal with a sharp crease delineating the sheer body-side that on closer inspection has some subtle surfacing and plan shape. The body side's relationship with the shoulder is complemented by a similar relationship with the rocker that also borrows thinking from last year's Honda FC Sport show car in tapering under the car. At the rear there are hints of the fantastic Honda Bulldog concept from 2001 with an upright narrow rear aspect flanked by deep section shoulders.

The P-NUT is a fun little concept, but like previous Honda concepts from the Southern California studio, we can't help but wish it was a little less superficial in its thinking and execution.